Decorative Concrete in Kansas City
Stamped, stained, colored, and overlay concrete solutions that combine durability with visual appeal.
What Is Decorative Concrete?
Decorative concrete is standard structural concrete finished to look like stone, brick, slate, or wood — using stamping, staining, or a bonded overlay. In Kansas City, Ford Concrete installs all three, engineered with air-entrained mixes and saw-cut control joints so the finish survives the metro's 35 to 40 freeze-thaw cycles a year.
This page is the category overview. It routes you to the three decorative methods we self-perform so you can go straight to the one that fits your project — stamped concrete that replicates ashlar slate or herringbone brick, stained and colored concrete that drives permanent color into new or existing slabs, and overlays and resurfacing that renew worn concrete without a full teardown.
Every decorative pour is built on the same fundamentals as our flatwork: a compacted subgrade, integral color or surface-applied color hardener, a release agent for crisp stamp detail, and a penetrating sealer tuned to Kansas City weather. Beauty that lasts because the structure underneath it is right — that is the difference between decorative concrete and a coating that peels in three winters.
Which Decorative Finish Fits Your Project?
The right method comes down to what you are surfacing, the look you want, and whether the concrete is new or already down. This guide maps each decorative method to the job it does best — then click through to the full page for that method.
| Method | Best For | The Look | New or Existing | KC-Specific Note |
|---|---|---|---|---|
| Stamped Concrete | Patios, driveways, pool decks | Flagstone, slate, brick, cobblestone | New pours | Color hardener + release, then a penetrating sealer that resists winter de-icing salt |
| Stained & Colored Concrete | Interior floors, existing patios, entries | Translucent, variegated earth tones | New or existing | Acid stain reacts with the cured slab; a UV-stable sealer holds the color outdoors |
| Overlays & Resurfacing | Worn, faded, or lightly spalled slabs | Micro-topping, stampable overlay, broom | Existing (sound substrate) | Bonds to structurally sound concrete — skips a full teardown and haul-off |
Not sure which one your project needs? We bring physical pattern and color samples to every free estimate so you can see and touch the options before you decide.
Decorative Concrete Services
Stamped Concrete
Decorative stamped concrete that replicates the look of brick, stone, slate, and wood for driveways, patios, and walkways.
Learn More
Stained & Colored Concrete
Acid staining, water-based staining, and integral color concrete for interior and exterior surfaces.
Learn More
Concrete Overlays & Resurfacing
Concrete overlay and resurfacing solutions that restore and transform existing concrete surfaces without full replacement.
Learn MoreDecorative Concrete Across the KC Metro
We install decorative concrete on both sides of the state line. A few of the most requested pairings:
- ▶Stamped concrete patios in Overland Park, KS
- ▶Stained garage floors in Lee's Summit, MO
- ▶Pool deck resurfacing in Olathe, KS
- ▶Stamped driveways in Blue Springs, MO
Explore the other categories
Decorative Concrete in Kansas City — FAQs
What's the difference between stamped, stained, and overlay concrete?
Stamping presses a texture and pattern into fresh concrete so a new slab reads as stone or brick. Staining drives translucent color into a cured slab — new or existing — for a marbled, variegated finish. An overlay bonds a thin new layer over tired concrete to restore it without a full teardown. Stamping and overlays change texture; staining changes color. Many Kansas City projects combine two — an integral-colored stamp, or a stained overlay.
Does decorative concrete hold up to Kansas City winters?
Yes, when it is built for the climate. The Kansas City metro runs 35 to 40 freeze-thaw cycles a year, so every exterior decorative slab we pour uses an air-entrained mix, saw-cut control joints, and a breathable penetrating sealer reapplied every two to three years. The failures you see on other decorative work — surface scaling and color loss — come from skipped air entrainment and film-forming sealers that trap moisture. We do neither.
Can you add a decorative finish to my existing concrete?
Often, yes. If the slab is structurally sound — no heaving, no wide settlement cracks — a resurfacing overlay or an acid or water-based stain can transform it without replacement. If the concrete is failing structurally, resurfacing only hides the problem; in that case we recommend repair or a tear-out first. We tell you which one you are looking at on the free estimate.
Which decorative finish is least slippery around a pool?
For pool surrounds we favor a textured stamped pattern or a broom-finished overlay over a smooth polished stain, because texture keeps traction when the surface is wet. We can also broadcast a fine slip-resistant additive into the sealer coat. See our pool deck options for the full slip-resistance breakdown.
How much does decorative concrete cost in Kansas City?
Cost depends on the method, square footage, pattern and color complexity, and whether we are pouring new or resurfacing existing concrete — a single-color stain runs very differently than a multi-pattern stamped driveway. Rather than quote a number that will not match your project, we give you a firm figure on a free on-site estimate where we bring pattern and color samples. Call (816) 721-1699.
Ready to Get Started?
From call to concrete — the fastest in KC.
Get a free, no-obligation estimate for your concrete project. We serve the entire Kansas City metro — call (816) 721-1699 or request your estimate online.