Concrete Overlays & Resurfacing Kansas City
Restore a worn, stained, or dated surface without demolition — microtoppings, self-leveling overlays, and stamped resurfacing bonded to hold up in KC freeze-thaw.
Concrete Overlays & Resurfacing in Kansas City
Concrete overlay and resurfacing solutions that restore and transform existing concrete surfaces without full replacement.
We serve both residential and commercial clients — from homeowners upgrading their property to general contractors building national brands. The same standards apply to every project.
What is a concrete overlay, and can it fix your surface?
A concrete overlay is a thin, polymer-modified layer bonded over existing concrete to renew the surface without tearing it out. If your slab is structurally sound but worn, stained, or dated, an overlay resurfaces it in a fraction of the time and disruption of a full replacement. Overlays range from a microtopping a fraction of an inch thick to a self-leveling overlay that corrects an uneven floor.
Overlays are the decorative-restoration arm of our work, so this page sits under the decorative concrete category alongside stamped concrete and stained & colored concrete. We resurface in Overland Park, Lee’s Summit, and Kansas City, KS among the metro cities we serve. The one thing an overlay can’t do is fix a failing slab — so the first question is always resurface or replace.
Should you resurface or replace your concrete?
An overlay renews the surface; it does not add structure. The rule is simple: if the slab is sound underneath, resurface; if the slab itself is failing, replace. Use the indicators below.
| What you see | Resurface with an overlay? | Why |
|---|---|---|
| Surface worn, faded, or stained | Yes | Cosmetic only — the slab is intact |
| Fine hairline / surface cracks | Yes | Overlay bridges and seals minor cracking |
| Uneven or slightly low areas | Yes — self-leveling | Overlay corrects profile and drainage |
| Wide, active, moving cracks | No — repair first | Movement telegraphs back through any overlay |
| Slab heaving or a corner sinking | No — repair / replace | Subgrade failure; surface work won’t hold |
| Full-depth breaks, crumbling edges | No — replace | Structural failure, not a surface issue |
When the table points to “repair first,” we address the cause — see concrete repair for crack injection and slab-lifting — and only then overlay. When it points to “replace,” we pour new flatwork. Honest triage up front is why an overlay from us lasts.
Which overlay system fits the job?
Overlay isn’t one product; it’s a family of systems chosen by thickness, wear, and the look you want. Here’s how we match system to job.
| System | Typical thickness | Best for | Finish |
|---|---|---|---|
| Microtopping | 1/16– 1/8 in | Worn patios, interior floors | Smooth, tintable, modern |
| Spray-down / knockdown | 1/8– 1/4 in | Pool decks, walkways | Textured, slip-resistant |
| Stamped overlay | 1/4– 3/8 in | Driveways, patios over sound slab | Stone / brick pattern |
| Self-leveling overlay | 1/4– 1 in | Uneven or low interior floors | Flat, polishable |
| Polymer resurfacer | 1/8– 1/4 in | General restoration, commercial | Broom or troweled |
Every one of these is polymer-modified for bond strength and flexibility, and every one is only as good as the surface prep beneath it.
Will an overlay actually last through Kansas City freeze-thaw?
The failure mode for overlays is delamination — the new layer letting go of the old. It happens when a contractor skips prep, and our freeze-thaw punishes that fast. We prevent it two ways: mechanical profiling to an open surface profile (a CSP roughened by grinding or shot-blasting so the overlay keys in), and a bond coat that chemically ties new to old.
We also feather-edge terminations and honor the existing joints so seasonal movement has somewhere to go instead of tearing the overlay. Done this way, a bonded overlay rides the same 35–40 freeze-thaw cycles a year that the parent slab already survives. The soil movement underneath is covered on our Kansas City soil conditions guide.
Overlays for driveways, patios, pool decks, and commercial floors
The same overlay toolkit restores a range of surfaces: a stamped overlay turns a plain driveway into a patterned one; a textured overlay re-grips a slick pool deck; a microtopping modernizes a patio; and a self-leveling overlay flattens a warehouse or retail floor ahead of new coating.
Commercial clients resurfacing retail and tenant spaces get overlays scheduled around their operating hours. Because we control repair, overlay, and replacement in-house, you get one honest recommendation instead of an upsell. See finished work on the project gallery and call (816) 721-1699 to walk your surface.
How much does resurfacing cost compared to replacing?
Resurfacing wins on cost for one structural reason: it reuses the slab you already own. Replacement pays to demolish the old concrete, haul and dispose of it, re-grade and compact the base, then form and pour new — an overlay skips all of that and renews the surface in place. That’s why a resurface runs a fraction of a full tear-out when the slab underneath is sound.
Four things move an overlay bid: the system chosen (a microtopping is lighter work than a self-leveling overlay), how much surface prep the old concrete needs, the square footage, and whether any crack repair or slab-lifting has to happen first. Where the slab has genuinely failed, resurfacing stops being the cheaper option — a new flatwork pour is. We don’t quote prices over the phone; we look at the slab and put a firm number in writing. Call (816) 721-1699.
Not sure whether to resurface or replace?
From call to concrete — the fastest in KC.
We’ll assess the slab honestly and tell you which your surface actually needs. Call (816) 721-1699 or request a free estimate.
How We Handle Concrete Overlays & Resurfacing in Kansas City
Assess and triage
We evaluate whether the slab is sound enough to overlay or needs repair first — the honest resurface-or-replace call before any work.
Repair and clean
Active cracks are addressed, contaminants removed, and the surface cleaned so the overlay bonds to concrete, not grime.
Profile the surface
We grind or shot-blast to an open CSP profile that gives the overlay mechanical grip — the step that prevents delamination.
Bond coat and apply
A bond coat ties new to old, then the chosen system — microtopping, self-leveling, stamped, or spray-down — goes down at spec thickness.
Texture, seal, and joint
We finish the surface, honor existing joints so movement has an outlet, and seal for wear and freeze-thaw protection.
Signs You Need Concrete Overlays & Resurfacing
Worn, faded surface
A dull, weathered surface over a sound slab is the ideal overlay candidate — cosmetic wear, intact structure.
Dated or stained finish
Discoloration and old finishes are surface-only problems a microtopping or stamped overlay resets completely.
Slightly uneven floor
Low spots and minor unevenness are corrected by a self-leveling overlay that also restores proper drainage.
Slick, low-grip surface
A too-smooth walk or deck gains traction from a sprayed, textured overlay without a full replacement.
Surface cracks and crazing
Fine hairline cracking is bridged and sealed by a polymer overlay; wide moving cracks need repair first.
Mismatched patchwork
A slab covered in old patches becomes one uniform surface under a bonded resurfacer.
Why Kansas City Chooses Ford Concrete
Resurface, not tear out
When the slab is sound, an overlay renews it in a fraction of the time, cost, and mess of demolition and replacement.
Honest triage
We control repair, overlay, and replacement in-house, so you get a straight resurface-or-replace answer — not a pitch for the bigger job.
Prep that prevents delamination
Mechanical profiling to an open CSP plus a bond coat keys every overlay to the parent slab so it survives KC freeze-thaw.
The right system for the job
Microtopping, spray-down, stamped, self-leveling, or polymer resurfacer — matched to thickness, wear, and the finish you want.
Trusted by National Brands
From your driveway to an Amazon warehouse — the same crew, the same standards, every project.
Taco Bell
New Construction
Overland Park, KS
Domino's Pizza
New Construction
Independence, MO
Freddy's
New Construction
Kansas City
Tidal Wave Car Wash
New Construction
Kansas City
Amazon
New Construction
Riverside, MO
Nortian Food Grade Protein Facility
New Construction
Springfield, MO
Get Your Free Concrete Overlays & Resurfacing Estimate in Kansas City
Or call us directly: (816) 721-1699
Concrete Overlays & Resurfacing in Kansas City — FAQs
Is a concrete overlay as good as replacing the slab?
How thick is a concrete overlay?
Why do some overlays peel or delaminate?
Can you overlay a cracked driveway or patio?
Will an overlay survive Kansas City winters?
Can an overlay be stamped or colored?
In-Depth Guides
Before You Decide, Read These
Ready to Get Started?
From call to concrete — the fastest in KC.
Get a free, no-obligation estimate for your concrete project. We serve the entire Kansas City metro — call (816) 721-1699 or request your estimate online.